1. Long-Lasting Durability – Built to Endure

Our outdoor LED displays are engineered for extended service life, utilizing high-grade materials and advanced manufacturing processes to ensure decades of reliable performance.

• Aerospace-Grade Aluminum Base: Integrated die-cast aluminum construction provides superior structural integrity and resistance to deformation, ensuring the screen remains flat and seamless over years of operation.

• IP65 Dual-Side Protection: 100% air-tightness tested – fully waterproof and dustproof on both front and rear. The display operates reliably in rain, snow, dust storms, and extreme weather conditions without the need for external air conditioning.

• Stable & Interference-Resistant: Advanced circuit design and electromagnetic shielding protect against signal interference, ensuring consistent, flicker-free performance even in high-interference environments such as stadiums, transportation hubs, and industrial areas.

• 100,000-Hour Lifespan: Premium LED chips and robust components deliver up to 100,000 hours to half-brightness, minimizing replacement frequency and maximizing return on investment.

2. Energy Efficiency – Lower Operating Costs

Our displays are designed with power conservation at the core, significantly reducing electricity consumption without compromising brightness or visual quality.

• Optimized Power Design: Advanced driver ICs and intelligent power management systems reduce average power consumption to as low as 260W/m² – up to 40% less than conventional outdoor LED displays.

• Smart Brightness Adjustment: Built-in ambient light sensors automatically adjust screen brightness according to environmental lighting conditions – saving energy during nighttime or overcast conditions while maintaining optimal visibility.

• Reduced Carbon Footprint: Lower power consumption means reduced CO₂ emissions, supporting your sustainability goals and green building certifications.

• Long-Term Cost Savings: Over a 5-year operational period, the accumulated energy savings can offset a significant portion of the initial investment, delivering exceptional total cost of ownership (TCO).

3. Flexible Installation & Efficient Dismantling – Quick Deployment

Our rental and fixed installation series are designed for rapid setup and teardown, dramatically reducing labor time and project costs.

• Tool-Free Quick-Lock System: Precision-engineered locking mechanisms enable cabinet-to-cabinet connection in seconds – no special tools required, no complex training needed.

• Ultra-Lightweight Design: At just 16-23kg/m², our cabinets are 40% lighter than traditional steel cabinets – reducing structural steel requirements, transportation costs, and on-site labor.

• 30% Lower Installation Cost: The combination of lightweight design, quick-lock system, and pre-assembled modules cuts installation time and costs by 30% compared to conventional products.

• Fast Dismantling & Storage: Designed for repeated assembly and disassembly – ideal for rental events, touring concerts, and temporary installations. Cabinets stack compactly for efficient storage and transport.

• Front & Rear Maintenance Access: Maintenance can be performed from either side of the screen – no need for rear access space, making installation possible in space-constrained locations.

4. Fully Customizable – Any Size, Any Shape

We understand that every project has unique requirements. Our modular design philosophy ensures that no matter the scale or complexity, we can deliver a solution that fits perfectly.

• Arbitrary Size Configuration: Standard cabinet sizes (500×500mm, 500×1000mm, 1000×1000mm, etc.) can be combined to create displays of virtually any dimension – from small retail windows to massive stadium screens spanning hundreds of square meters.

• Custom Shapes: Support for curved, angled, folded, and creative configurations – enabling unique installations that match architectural designs or creative stage concepts.

• Flexible Pixel Pitches: Available in a wide range of pixel pitches (P2.6 to P10+), allowing you to select the optimal resolution for your specific viewing distance and application.

• Tailored Solutions: Our engineering team works closely with you to design custom cabinets, mounting structures, and control systems – ensuring seamless integration with your project specifications.

5. The Ideal Choice for Outdoor Large-Screen Applications

Combining durability, energy efficiency, installation flexibility, and customizability, our outdoor LED displays are the preferred solution for:

Seamless splicing allows for curved designs, and the elegant curves add a striking touch to the city.

waterproof test,

ALL WEATHER PROOF

Low temperature resistant design, working temperature is -30°C~60°C.No need any AC, saving your operation cost.
Double waterproof design, both cabinet and module are waterproof, the waterproof rating is IP65/ IP65.

It can achieve right-angle splicing and be transformed into naked-eye 3D display.

Sturdy bracket set, seamless splicing, simple and quick installation and disassembly.

The hard-wired design, power supply and receiver card box, allows for quick disassembly and maintenance, and ensures safety.

The cables are concealed inside the cabinet, offering a high level of protection, safety, and long lifespan.

Core Product Advantages

1. Aerospace-Grade Aluminum Unibody Construction – Ultra-Lightweight, Cost-Effective, and High Efficiency

Our product features an integrated aerospace-grade aluminum base with a dual-layer aluminum frame structure that ensures exceptional stability and outstanding thermal conductivity, fundamentally solving the persistent issues of heat buildup, light decay, and blackouts commonly found in long-term outdoor LED screen operation.

With a total weight as low as 23kg/m², the screen achieves a 40% weight reduction compared to traditional outdoor LED displays. This ultra-lightweight design significantly simplifies hoisting and wall-mounting installation, eliminating the need for complex steel structural support and reducing installation costs by up to 30%. Furthermore, the reduced structural load and lower mechanical wear translate into over 30% savings in three-year operation and maintenance costs, delivering a truly "install once, worry-free for years" solution.

2. Full IP65 Dual-Side Waterproof Protection – All-Weather Stable Operation Without Air Conditioning

Every screen undergoes rigorous 100% air-tightness testing before leaving our factory. Both the front and rear surfaces achieve the highest IP65 waterproof and dustproof rating, effectively withstanding harsh outdoor conditions including heavy rain, dust storms, high humidity, and extreme temperatures.

The display operates reliably 24/7 without the need for external air conditioning systems, relying solely on its highly efficient aluminum heat dissipation architecture to maintain stable performance. This design effectively eliminates equipment failures, screen flickering, and water damage, ensuring superior adaptability to diverse outdoor environments.

Case Study: All-New Nissan Patrol Launch in Oman

Client: Al Hashar Automotive – the official and exclusive distributor of Nissan in the Sultanate of Oman

Project: Promotion and experiential launch event for the all-new Nissan Patrol

Location: Oman

It can be installed flush against the wall in various ways, such as hanging, stacking, wall-mounted, etc.

FAQ – Frequently Asked Questions

1. What is your lead time?

Our standard lead time is 7 to 15 working days after order confirmation and deposit receipt. The exact timeline depends on your order quantity, model selection, and specific configuration requirements. We will confirm the delivery date upon order placement and keep you updated throughout the production process.

2. What is your warranty policy?

We offer a 2 to 3-year warranty depending on the specific model and configuration. During the warranty period, we cover any defects in materials and workmanship – providing free repair or replacement for faulty components. Extended warranty options up to 5 years are available upon request.

3. How do you package the LED displays?

We use professional flight cases (aviation cases) for packaging. Flight cases are made of lightweight, durable materials and can be reused multiple times. They provide excellent protection during long-distance transportation and are especially suitable for rental screens and products that require frequent disassembly and assembly.

Available configurations:

• 5-in-1: One flight case holds 5 cabinets

• 6-in-1: One flight case holds 6 cabinets

This packaging solution significantly saves shipping costs and storage space.

4. How do you ensure quality before shipment?

We take quality control very seriously. Every LED display undergoes a 48-hour aging test before shipment.

Our aging test includes:

• White screen test

• Single-color tests (Red, Green, Blue)

• Grayscale gradient test

• Video and text effect test

This aging process helps identify potential issues such as dead pixels, color inconsistencies, or flickering that might only appear after a period of operation.

Our Zero-Dead-Pixel Guarantee:
We guarantee zero dead pixels on every module that leaves our factory.

5. Do you accept third-party inspection?

Absolutely. We fully support inspections by independent third-party agencies such as V-Trust, SGS, Bureau Veritas, Intertek, etc. We have successfully passed multiple third-party inspections with official reports available upon request – giving you full transparency and confidence in your purchase.

6. What are the power supply specifications?

We offer two standard power supply options:

Both are industry-standard switching power supplies widely used in LED displays.

7. What are the aviation plug specifications?

We use international standard aviation plugs with the following specifications:

• Current Rating: 20A

• Cable Specification: 3 × 2.5mm²

• Voltage Rating: 250VAC

• Protection Rating: IP44 / IP65 (waterproof and dustproof)

These industrial-grade connectors ensure durable, weather-resistant, and stable power delivery, complying with global electrical standards (IEC, UL, CE).

8. What payment terms do you accept?

We accept:

• T/T (Telegraphic Transfer): 30% deposit + 70% balance before shipment

• L/C (Letter of Credit): At sight

• Western Union / : For sample or small orders

Flexible payment terms can be negotiated for long-term partners.

9. Do you offer customization?

Yes. We offer full customization in terms of:

• Cabinet size & color

• Pixel pitch

• Brightness level

• Maintenance type (front or rear)

• Cabinet material (die-cast aluminum or magnesium alloy)

• Power supply configuration

• Software and control system compatibility

Just tell us your specific requirements, and we will tailor the solution accordingly.

10. How do you handle after-sales issues?

We take full responsibility for any quality issues under warranty. Our support includes:

• Free spare parts replacement (modules, power supplies, receiving cards)

• Lifetime remote technical support (WhatsApp/Email/Video Call)

• Free installation & assembly tutorial videos

• Return-to-factory repair service (RMA)

• On-site engineer service available upon request

We are committed to resolving any issue promptly and professionally.

11. What is the lifespan of the LED display?

Our LED displays have a lifespan of 100,000 hours to half-brightness (approximately 10-11 years of continuous use), ensuring long-term reliability and value.

12. What is the difference between indoor and outdoor LED displays?

Our manufacturing facility encompasses electronic processing, automated SMT production lines, adhesive application lines, spray painting and high-speed screw machines, LED display assembly, debugging, and aging systems. Our efficient manufacturing processes enable us to produce over 1 million square meters of LED displays annually. We perfect the entire manufacturing process by implementing rigorous QC (Quality Control) procedures managed by a highly trained technical team.