Comprehensive Guide to Moisture & Waterproofing for LED Displays

Scientific Moisture Protection, Safe Illumination!
-- From environment to maintenance, safeguarding the stable operation of every screen.

【Storage Environment: Keep Dry & Properly Packaged】

• High-ground Dehumidification: Choose high-ground warehouses and equip with dehumidifiers.

• Sealed Moisture-proofing: Do not leave screens exposed or against walls; add desiccants when packed in boxes.

• Post-rain Inspection: After dampness recedes, make sure to power on and test the screen.

【Indoor Use: Safety Check & Power-on Moisture Removal】

• Safety Check: Inspect circuits and switches, keep the environment absolutely dry.

• Power-on Moisture Removal: Power on for >3 hours daily to generate heat and dissipate moisture.

• Auxiliary Dehumidification: Blow dry the cabinet with cool air; clean dust regularly.

【Rental Emergency: Power Off in Rain, Power On Level by Level】

• Rain Emergency: Cover quickly to prevent rain; open and dry in sunny weather.

• Cool Air Drying: In rainy weather, open the cover and use cool air; ventilate for 8 hours.

• Level-by-level Power-on: Brightness is divided into 5 levels; light up each level for 4 hours to dissipate moisture.

【Outdoor Protection: Regular Inspection, Tighten Seals】

• Check Rubber Rings: Check for aging and defects to ensure a perfect seal.

• Tighten Latches: Check screws and latches to prevent loosening and water seepage.

【Maintenance: Long-term Storage, Regular Power-on】

• Regular Power-on: Screens stored for a long time need frequent power-on debugging.

• Fault Prevention: Scientific maintenance prevents dead lamps/black spots.